Features:
A special new version of braid knitting, 6 heads knitting machine to manufacture round, tubular or flat cords, ropes...etc. For elastic or rigid.
The productions for apply in garments, ornaments, shoelace, shopping bag rope, venetian blind rope and zipper industry...etc.
* CK-06A special used for making high tensity of knitting fillet cord for used of metal zipper and plastic zipper.
(The zipper chain locking strength increase 50-100% higher than used of twisted fillet cord.)
- Different diameters of cord, ropes can be made, from 1 to 12.5mm by means of interchangeable cylinders and thread guider.
- The machine can used any type of count of yarn.
- No need special maintenance is required thanks to its fully mechanical design.
- And the machine is noiseless and can be feed directly from bobbins or cones.
- And can be feed with stuffer core.
- The machine is equipped with a yarn stop motion in cast of yarn breakage or when finishing cones.
- The machine is equipped with a pre-set meter counter, it provides actual production data and easy for production managing.
Specification:
|
TECHNICAL DATA |
||||||||
|
Spec. |
4 Needle |
4 Needle |
6 Needle |
6 Needle |
6 Needle |
6 Needle |
8 Needle |
8 Needle |
|
2 mm |
4 mm |
2.5 mm |
4 mm |
6 mm |
8.5 mm |
6 mm |
8.5 mm |
|
|
Knitting Range: Dia. |
0.5 mm | 2.5 mm |
1 mm | 4.5 mm |
1 mm | 3 mm |
1.5 mm | 5 mm |
2.5 mm | 7 mm |
3 mm | 9.5 mm |
2.5 mm | 7 mm |
3 mm | 9.5 mm |
|
Number |
6 Spindles |
|||||||
|
Density |
1.5 - 12 Pick/cm |
|||||||
|
Speed Max. |
1400 Stitch/min |
|||||||
|
Production |
400/1000 Meter/Hr ( Depend on density ) |
|||||||
|
Motor |
1 HP Inverter |
|||||||
|
Creel |
84 Ends |
|||||||
Optional Device:
- Rubber feeder device
- Heat setting device (For flat braid)
- Back take-off device
- Finish products winding device
